capillary thermostat RT 8804.01U, 50-320 ° C,2 clamp
| Délka dodání z ext. skladu | 7 |
| Celková délka kapiláry s čidlem | 1000 mm |
| Délka a průměr čidla: | 1 000 mm |
| Jmenovité napětí [V]: | 230V~240V |
| Jmenovitý proud [A]: | 16,0 A |
| Pro teplotu okolí °C : | 0 °C do +150 °C |
| Spínací, rozpínací kontakt | rozpínací |
| Teplotní rozsah | 50 -320°C |
| Výstupní hřídel plná | 6/4,6 |
| Značka elektro | Univerzální |
| Připojení | Konektor 6,3 x 0,8 mm |
The RT 8804 temperature controller ( hereinafter referred to as RT) is intended for temperature regulation in devices powered by alternating electric current . RT does not serve as a switch .
Capillary length = 1000 mm, sensor diameter = 3 mm Shaft length from mounting plane = 23 mm
Description
RT is a single-pole capillary temperature controller based on the principle of fluid expansion . The RT consists of two basic parts - a switching device and a capillary temperature sensor . There is a protective earth pin on the cover . The controlled temperature can be set by the user within the control range .
Installation RT by two screws M4.
Advantages
-
possibility of variable location and rotation of the sensor
-
regardless of the position of the switching device
-
possibility to mount the switching device in any position
-
possibility to bend the capillary according to the mounting conditions
-
the system has no intrinsic power consumption
-
low cost of operation and maintenance versus electronic systems
Accuracy of setting the max. Expansion temperature
± 10 ° C
Switching value difference
4-10 K
| Max. Sensor temperature | 330 ° C |
| Cover | IP 00, RT is built-in |
| Protection class | AND |
| Lifespan | 100,000 automatic cycles |
| Min. Bending radius of capillary | Rmin = 5 mm |