- Voltage 230 V
- Maximum discharge height 13 m
- Maximum flow 300 l / min
- Maximum draft 6.5 m
- Rated current 5.2 A
- Discharge DN diameter (1 2/4 "= 6/4")
- Weight 15.5 kg
Technical specification of submersible sludge single-stage pump stainless steel cast iron construction carbide mechanical seal SiC / SiC oil box cast iron open impeller type VORTEX (VOX) throughput of parts up to 20 mm asynchronous electric motor with thermal protection winding supply cable 10 m stainless steel cutting knife float switch pumping cesspools and septic tanks pumping tanks and pools irrigation system Submersible sludge pump UNIQUA CESSPIT is designed for pumping heavily polluted wastewater with high density, ie for pumping cesspools and septic tanks, sludge sumps, wastewater, industrial water. The use of the pump for pumping flammable liquids, toxic and aggressive (alkalis, acids) substances is not permitted. It is also forbidden to use the pump in potentially explosive atmospheres. The manufacturer can supply the pump with different cable lengths according to the customer's wishes. The pump can be used in a vertical, horizontal or inclined working position. Construction The UNIQUA CESSPIT pump is equipped with an electric motor on a common shaft as one compact hermetic unit with a suction opening located in the lower part. The pump is single-stage with a Vortex type impeller. The electric motor is single-phase, asynchronous and is protected against the penetration of the pumped liquid by a mechanical seal, an oil box (filled with refined rapeseed oil) and a seal. The motor is protected against overheating by an automatic reversible thermal fuse (short-term protects the motor from destruction). The connecting electrical cable is perfectly sealed in the special outlet against the penetration of the pumped liquid and is secured against being pulled out. The user is obliged to protect the electric motor against overload by overcurrent protection (motor starter).