Silicone neutral BL6 - cartridge 310ml

Silicone neutral BL6 - cartridge 310ml
Silicone neutral BL6 - cartridge 310ml
Silicone neutral BL6 - cartridge 310ml
Code0068212ProducerBL6Warranty24 months

CHARACTERISTICS
One-component, low-modulus silicone with a neutral, odorless vulcanization system.
Excellent adhesion to a wide range of substrates, creates a permanently flexible joint.
It resists UV radiation, is colorfast with minimal shrinkage.
Can't be painted over.
Color: Black
Packaging: Cartridge 310 ml

USE
Suitable for sealing and gluing on porous substrates - masonry, concrete, plaster, wood without coatings.
Suitable for expansion joints - absorbs large movement of joints, use to increase during high stress
adhesion of porous substrates primer coating.
It can also be used in the production of windows and doors, glazing and gluing of plastics (must be tested).
The putty is suitable for non-ferrous metals, glazed surfaces, PVC, polyacrylate and polycarbonate.
Not suitable for polyethylene and polypropylene

APPLICATION
All surfaces must be clean, dry and free of grease and dust.
Clean non-porous materials such as aluminum, glass and metals with a suitable solvent.
Clean porous materials such as concrete, masonry, plaster, etc. mechanically from loose particles.
Primers are not normally required, but may be used on some specific surfaces to achieve maximum adhesion.
After suitable preparation of the joint and masking of the edges, the sealant is applied with an application gun to the joint and aligned within 10 min. using a spatula dipped in a soapy solution.
The masking tape is then removed immediately.
Unhardened sealant can be removed using a solvent, hardened sealant can only be removed mechanically.

DescriptionDownload
Tento internetový obchod ukládá soubory cookies, které pomáhají k jeho správnému fungování. Využíváním našich služeb s jejich používáním souhlasíte.
Detailed settingsAllow everything