immersion heater 2200W L-400 mm, 230V screw including magnesium anode

príkon: 2400 W, 230 V príruba: M48x2, mosadz vykurovacej vetvy: CU - morené
Obrázek (2)
News
Obrázek (2)
Obrázek (2) (1)
Code0068948PN M48x2 (SDK)

TYPE 4206

The material of the jacket of the heating branches
CU-pickled

The heating body is composed of three U-shaped heating branches, soldered to the head with Ag solder. Each branch has a third of the total power. The head is equipped with a cover with an AP 16/12 stuffing box, which ensures IP 54 protection. You can also order bodies without a cover. For assembly, there is an OK 65 hexagon on the head. The head is equipped with an M 48x2 or G 11” thread. Heaters are manufactured with a brass or stainless steel head. The material of the jacket of the heating branches is pickled copper, nickel-plated copper or stainless steel.

The body is intended for direct heating of water and similar liquids with a permissible operating pressure of max. 1.0 MPa. During operation, it must be constantly submerged up to the head. In the event that there is an excessive increase in deposits on the jacket of the heating branches at the place of use of the heating elements, we recommend to ensure adequate water treatment to increase the service life.

Connection options:
Each branch has a voltage of 230 V, for the version with a power input of 7500 W, a voltage of 400 V. The version with branches for a voltage of 230 V can be connected single-phase or 3x400 V.
Versions with 400 V branches can be connected to 3x400 V ?.

DescriptionDownload
Tento internetový obchod ukládá soubory cookies, které pomáhají k jeho správnému fungování. Využíváním našich služeb s jejich používáním souhlasíte.
Detailed settingsAllow everything