0products
0 EUR
immersion body 2400W L-408 mm, 230V screw without surface treatment
The TATRAMAT heating element consists of one shaped heating branch, attached to a brass head. The heating branch is terminated with connection terminals with M4 screws, which are used to connect the supply cable. There is an OK 50 hexagon on the head for screwing in.
Můžeme Vám zajistit expedici od: Thursday 25.4 v počtu 6 ks.
| Napětí topné spirály [U] (V) | 230 V |
| Příkon topného tělesa [P] (W) | 2400 W |
| Připojovací závit ISO | Metrický- M48x2,0 |
| Značka elektro | Tatramat |
The TATRAMAT heating element consists of one shaped heating branch, attached to a brass head. The heating branch is terminated with connection terminals with M4 screws, which are used to connect the supply cable. There is an OK 50 hexagon on the head for screwing in.
The heater is designed for direct heating of water and similar liquids. The heater must be constantly immersed up to the head during operation.
The permissible operating pressure is 0.6 MPa.
In the event that there is an excessive increase in deposits on the mantle of the heating branch at the place of use of the radiators, we recommend to ensure adequate water treatment to increase the service life.
The heater is designed for direct heating of water and similar liquids. The heater must be constantly immersed up to the head during operation.
The permissible operating pressure is 0.6 MPa.
In the event that there is an excessive increase in deposits on the mantle of the heating branch at the place of use of the radiators, we recommend to ensure adequate water treatment to increase the service life.
Description
Tento internetový obchod ukládá soubory cookies, které pomáhají k jeho správnému fungování. Využíváním našich služeb s jejich používáním souhlasíte.