Délka kabelu [m] | 10 m |
Hloubka ponoru cm (A) | 700 |
Jmenovité napětí [V]: | 230V |
Jmenovitý příkon [W]: | 900 W |
Objem | --- |
Objem nádoby | --- |
Polarita (otáčky/min) | --- min-1 |
Průměr | --- |
Průměr sací hadice | 2" |
Rozměr | --- |
Teplota čerpaného média max.[C°] | 40 °C |
Obchodní název motoru | --- |
Výkon | --- W |
DESCRIPTION
The submersible pump is intended for tapping clean or rainwater, chlorinated water (e.g. swimming pools), service water and polluted water with a maximum of 5% of soluble substances with a maximum diameter of 25 mm.
The pump is not intended for pumping potable water, salt water, liquid food, aggressive chemicals, sticky, flammable, explosive or gaseous liquids, liquids whose temperature exceeds 40 °C, sandy water and abrasive liquids.
Most often, the pump is used to pump out water during flooding, overpumping and draining tanks, pumping water from wells and shafts.
The pump has a powerful motor with an input of 900 W, which is powered by electricity from a 230 V source.
The power cable is 10 m long.
The pump provides a flow of 20,000 liters of water per hour with a maximum head of 14 meters.
The maximum recommended diving depth is 7 meters.
The submersible pump is equipped with an integrated float, therefore the tank for the pump should have dimensions of at least 30 x 26 x 52 cm so that the float with the switch can be pulled out well.
For maximum safety, the pump includes a plug to prevent discharge that meets the IPX8 degree of protection.