Voltage 400 V Max. discharge height 100 m Max. flow rate 36 l/min Max. immersion 20 m Nominal current 1.55 A Discharge diameter 1 ", Pump diameter 92 mm Working permissible discharge 80 m, cable length 15 m.
Technical specifications
submersible screw pump
stainless cast iron construction
SiC/SiC carbide mechanical seal
supply cable 15 m (optionally 25,30,35,40,45 m)
maximum pump diameter 92 mm
asynchronous electric motor without winding thermal protection
Use
pumping clean water from wells
pumping clean water from underground wells
irrigation systems
supply of drinking water to households
The UNIQUA AQUA submersible pump is intended for pumping clean water, service water and service water. The pump is suitable for pumping water from wells, from wells with a minimum diameter of 100 mm for supplying domestic waterworks and water pipes, or for spraying in gardening, with a maximum immersion in the pumped liquid of 20 meters. The pump is not intended for pumping waste water. The use of the pump for pumping flammable liquids, toxic and aggressive (bases, acids) substances, petroleum products and oils of all kinds is not allowed. It is also prohibited to use the pump in an environment with a risk of explosion and in swimming pools where people are in contact with water. When pumping utilitarian, operating or special water (e.g. mineral, mine, etc.) it is necessary to comply with the listed limit pollution and concentration of hydrogen ions in order not to reduce the service life and reliability of the pump. The manufacturer is able to deliver the UNIQUA AQUA pump with a cable length according to the customer's request. The maximum temperature of the pumped liquid is 35°C. The pump can be used in a vertical, horizontal and inclined position.
Construction
The UNIQUA AQUA system consists of a single-spindle hydrostatic pump and a submersible electric motor. The main part of the pump is the stator with a rubber insert, in the cavity of which the spindle rotates. The electric motor is asynchronous three-phase. The user is obliged to protect the electric motor against overload with overcurrent protection (motor starter).
The connecting electric cable is perfectly sealed against the penetration of the pumped liquid in a special outlet and secured against tearing out. Water seepage into the electric motor space is prevented by a mechanical seal and a guffer. The product is protected by a utility model and a patent.