UNIQUA AQUA oil engine.
- Voltage 400 V
- Max. discharge head 100 m
- Max. flow rate 56 l / min
- Max. draft 60 m
- Rated current 3.3 A
- Discharge diameter 1 "
- Pump diameter 95 mm
- Working permissible discharge 80 m
- cable length 15 m.
Technical specification submersible spindle pump stainless steel cast iron construction carbide mechanical seal SiC / SiC supply cable 15m, (on request 25,30,35,40,45,50,55,60m etc.) maximum pump diameter 95mm asynchronous electric motor without thermal winding protection Application pumping clean water from wells pumping clean water from underground wells irrigation systems household supply of drinking water The UNIQUA AQUA submersible pump is designed for pumping clean water, service water and operating water. The pump is suitable for pumping water from wells, from boreholes with a minimum diameter of 100 mm for feeding domestic waterworks and water mains, or for spraying in horticulture, with a maximum immersion in the pumped liquid of 60 meters. The pump is not intended for pumping waste water. The use of the pump for pumping flammable liquids, toxic and aggressive (alkalis, acids) substances, petroleum products and oils of all kinds is not permitted. It is also forbidden to use the pump in potentially explosive atmospheres and in swimming pools where people are in contact with water. When pumping service water, process water, or special water (eg mineral water, mine water, etc.), it is necessary to observe the stated limits of pollution and concentration of hydrogen ions in order not to reduce the service life and reliability of the pump. The manufacturer is able to supply a UNIQUA AQUA pump with a cable length according to the customer's requirements. The maximum temperature of the pumped liquid is 35 ° C. The pump can be used in vertical, horizontal and inclined positions. Construction The UNIQUA AQUA set consists of a single-spindle hydrostatic pump and a submersible electric motor. The main part of the pump is a stator with a rubber insert, in the cavity of which the spindle rotates. The electric motor is asynchronous three-phase. The user is obliged to protect the electric motor against overload by overcurrent protection (motor starter). The connecting electric cable is perfectly sealed in the special outlet against the penetration of the pumped liquid and secured against being pulled out. Leakage of water into the space of the electric motor is prevented by a mechanical seal and a seal. The product is protected by a utility model and a patent.