sludge pump with 10m cable UNIQUA CESSPIT J10P 0,7kW 230V, float

UNIQUA CESSPIT

• Voltage 230 V
• Max. discharge height 9.5 m
• Max. flow 210 l / min
• Max. draft 6.5 m
• Rated current 3.15 A
• Discharge diameter (1 1/4 "= 5/4")
• Weight 13.5 kg

Technical specification of submersible sludge single-stage pump float switch stainless steel cast iron construction carbide mechanical seal SiC / SiC oil chamber cast iron open impeller type VORTEX (VOX) throughput of parts up to 20 mm asynchronous electric motor with thermal protection winding supply cable 10 m Use of pumping sludge pits septic tanks pumping tanks and swimming pools irrigation system Submersible sludge pump UNIQUA CESSPIT is designed for pumping heavily polluted wastewater with high density, ie for pumping cesspools and septic tanks, sludge sumps, wastewater, industrial water. The use of the pump for pumping flammable liquids, toxic and aggressive (alkalis, acids) substances is not permitted. It is also forbidden to use the pump in potentially explosive atmospheres. The manufacturer can supply the pump with different cable lengths according to the customer's wishes. The pump can be used in a vertical, horizontal or inclined working position. Construction The UNIQUA CESSPIT pump is equipped with an electric motor on a common shaft as one compact hermetic unit with a suction opening located in the lower part. The pump is single-stage with a Vortex type impeller. The electric motor is single-phase, asynchronous and is protected against the penetration of the pumped liquid by a mechanical seal, an oil chamber (filled with refined rapeseed oil) and a seal. The motor is protected against overheating by an automatic reversible thermal fuse (short-term protects the motor from destruction). The connecting electrical cable is perfectly sealed in the special outlet against the penetration of the pumped liquid and is secured against being pulled out. The user is obliged to protect the electric motor against overload by overcurrent protection (motor starter).