Silicone neutral PENOSIL Premium transparent, 310ml (BL010102-310TR)

Aplikačná teplota +5 °C až 40 °C / Farba Transparentná / Objem 310 ml
Silicone neutral PENOSIL Premium transparent, 310ml (BL010102-310TR)
News
5,49 EUR 4,54 EUR excl. VAT
Buy
Poptat
Skladem 4 pcs
Ext. stock 20 Qty
Personally in shop:Tuesday 2.4With a delivery company:Wednesday 3.4
CodeTE PE-2005ProducerPENOSILWarranty24 months
Objem310 ml
Pracovní teplota [°C]:-40 až +100 °C

CHARACTERISTICS
One-component silicone sealant with good processing properties, excellent adhesion and a wide area of application. Insulates and seals in indoor and outdoor conditions. Adheres to most building materials such as stone, metal and wood materials, glass and plastic surfaces. Suitable for slightly alkaline, metal surfaces. Adheres well to porous surfaces. Resistance to fungi, UV radiation, moisture and weathering. Excellent processing and smoothing properties. A faint smell.

USE
Insulation and sealing of joints during normal construction and repair work. Also on surfaces where acid curing silicone cannot be used eg sheet metal and ventilation work etc. All finishing, insulation and ventilation work.

APPLICATION PROCEDURE
Use temperature between +5 °C and +40 °C. The temperature of applying the sealant must be +20 °C - +25 °C. Application at temperatures below +5 °C can only be carried out when the connected surfaces are free of condensation, snow and ice. Not suitable for sealing aquariums and for use under water. Cannot be painted.

SURFACE PREPARATION
The surfaces must be cleaned of dust, loose particles and oil. Non-porous surfaces should be cleaned with solvent and a clean, lint-free cotton cloth. Solvent residues must be removed with a clean cloth before evaporation.
310 ml cartridge: Cut off the threaded end of the cartridge and screw on the application nozzle to direct the sealant. Cut the threaded end to create a suitable opening for application. Insert the cartridge together with the applicator into the gun and press the gun trigger repeatedly to fill the installation nozzle with sealant.
600 ml foil pack: Open the application nozzle of the gun, insert the pack into the gun and open the side of the applicator by removing the retaining clip. Place the application nozzle on the open end and screw on the cap. Apply the sealant to the joint by repeatedly and evenly pressing the trigger of the gun and smoothly pulling the nozzle along the joint. After application, smooth the surface with a rubber silicone scraper and remove excess material. Ensure sufficient ventilation in all joints. During curing, make sure that no dirt settles on the surface and that the joint surface is not subjected to mechanical stress.

CLEANING
Unhardened sealant, tools and hands can be cleaned with PENOSIL Premium cleaning wipes. Hardened sealant can be removed mechanically using PENOSIL Premium Silicone Remover to soften the sealant. Clean the surface with a sponge and water.

SPECIFICATIONS
Structure creation time min. 13–15
Curing time mm/24 h 2.5–3
Density (DIN 53 479-B) g/cm3
0.99 – transparent
1.26 – colored

PROPERTIES OF CURED SEALING
Joint movement, ISO 11600% ± 12.5
Microbiological growth intensity, ISO846 0+
Flow resistance, ISO7390 mm 0
Volume change, ISO10563%
25 ± 1 – transparent
20 ± 1 – colored
Elongation at break, ISO37%
525 ± 25 – transparent
400 ± 25 – color
Tensile strength, ISO37 N/mm2
1.4 ± 0.2 – transparent
2.5 ± 0.2 – colored
Modulus at 100% elongation, ISO 37 N/mm2
0.5 ± 0.1 – transparent
1.1 ± 0.1 – colored
Hardness (Shore A)
35 ± 2 – transparent
45 ± 2 – colored
Temperature resistance °C -40 to +100
(The listed parameters were measured at a temperature of +23 °C and a relative humidity of 50%.)

SAFETY
Ensure adequate ventilation during application. Keep out of reach of children. Avoid contact with skin and eyes. In case of eye contact, rinse immediately with water and seek medical attention. The hardened sealant can be handled without risk to health. Detailed safety information is available in the safety data sheet (SDS).

DescriptionDownload
Tento internetový obchod ukládá soubory cookies, které pomáhají k jeho správnému fungování. Využíváním našich služeb s jejich používáním souhlasíte.
Detailed settingsAllow everything