Set with gearboxes DMRV030 / 040 + 0.18kW / 4p. 230V; n2 = 2.3 rpm

Single-phase design of one set

• Engine: 180W
• Tension:              230V
• Output speed: n2 = 2.3   rpm
• Max load: 120 kg.
• Design: with two worm gearboxes
• Outlet opening: 18 mm from the groove on both sides of the gearbox  

Technical parameters:

• Protection: IP55
• For ambient temperature: 80 ° C
• Standard paint: RAL5010
• Casing: Aluminum
• Dimensions of the set: LxWxH - 32 x 23 x 21 cm

When roasting larger piglets and pigs, it is necessary to ensure the most ideal centering of the roast and, if possible To avoid operation with large backlash needles, these can cause excessive shocks to the transmission shafts and damage the gear system.

As part of safety, it is generally necessary to connect the motor to the mains via a circuit breaker and also observe the applicable standards during installation (this will prevent electric shocks and reduce the possibility of motor damage).