immersion body 1600W L-340 mm, 230V screw without surface treatment
The TATRAMAT heating element consists of one shaped heating branch, attached to a brass head. The heating branch is terminated with connection terminals with M4 screws, which are used to connect the supply cable. There is an OK 50 hexagon on the head for screwing in.
The heater is designed for direct heating of water and similar liquids (eg in boilers type OUV III / 160L and OUV III / 200L).
The heater must be constantly immersed up to the head during operation.
The permissible operating pressure is 0.6 MPa.
In the event that there is an excessive increase in deposits on the mantle of the heating branch at the place of use of the radiators, we recommend to ensure adequate water treatment to increase the service life.
The heater is designed for direct heating of water and similar liquids (eg in boilers type OUV III / 160L and OUV III / 200L).
The heater must be constantly immersed up to the head during operation.
The permissible operating pressure is 0.6 MPa.
In the event that there is an excessive increase in deposits on the mantle of the heating branch at the place of use of the radiators, we recommend to ensure adequate water treatment to increase the service life.