Electric car battery charger BD02-Z10.0A-P1, 2A/10A, 6V/12V, IP65, LCD
| Jmenovité napětí [V]: | 230V |
| Jmenovitý příkon [W]: | 160 W |
| Obchodní název motoru | --- |
| Kapacita akumulátoru | --- Ah |
| Objem nádoby | --- |
| Výkon | 160 W |
| Rozměr | 23,6 x 11,1 x 7 cm |
| Objem | --- |
DESCRIPTION
The car battery charger is used to charge lead-acid and LiFePO4 batteries with a voltage of 6 V / 12 V, used e.g. in passenger cars, motorcycles, boats, etc. It is equipped with a connection cable with an SAE connector (1.2 m) and two connectable charging cables (one with alligator clips 0.4 m and the other with eyelets 0.4 m) and three fuses (of which one fuse is located on the charging cable with eyes) .
The automatic 10-step charging is controlled by a microprocessor (MCU technology), which records the state of the battery and adjusts the charging so that the correct voltage flows into the battery. This is achieved by the battery being charged to the maximum. Once fully charged, the charger switches to maintenance mode to prevent overcharging the battery.
SPECIFICATIONS
Power consumption: 160 W
Output voltage: 6V / 12V
Battery capacity: 4-200 Ah
Voltage / frequency: 230 V - 50 Hz
Power: 0.16 kW
Suitable battery types: all types of lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL)
Protection class: IP65
Cable length: 1.5 m
Temperature for use: -20°C to +40°C
Dimensions: 23.6x11.1x7 cm
Charging voltage: 6 V / 12 V