complete with front wheel and motor 0.37kW / 380V n2 = 2.1 min-1;

492,8 EUR 407,3 EUR excl. VAT

Personally in shop:on request

With a delivery company:on request

Three-phase design of the EXTRA set

Engine: 370W
Tension: 380V
Output speed: n2 = 2.1 rpm
Max load: 320 kg.
Design: with high-quality HYDRO-NEC 2x worm gearbox
Outlet opening: 25 mm from the groove on both sides of the gearbox

Replacement No. PKM 41371

Technical parameters of the set:

The maximum output torque is 850 Nm. with 0.37kw engine.

For continuous operation, the gearbox is dimensioned for approx. 100-120Nm

P211A-F08SI-QB7: P211A 1: 9.83 71 / B14, + P050 1:68 71 / B14 + GMYL71B4B14F1; P050FB09C0-QB3: P050FB 1:68 71 / B14; Y371B4B14F1; 0.37 kW; 2p = 4; 380 V; 50 Hz; IP55; F; IMB14

Protection: IP55
For ambient temperature: 80 ° C
Standard paint: RAL7030
Casing: Aluminum
Dimensions of the set: LxWxH

When roasting larger piglets and pigs, it is necessary to ensure the most ideal centering of the roast and, if possible To avoid operation with large backlash needles, these can cause excessive shocks to the transmission shafts and damage the gear system.

As part of safety, it is generally necessary to connect the motor to the mains via a circuit breaker and also observe the applicable standards during installation (this will prevent electric shocks and reduce the possibility of motor damage).