Single-phase EXTRA
design of the MOLL MOTOR 370
W set for
230V voltage with a high-quality HYDRO-NEC 2x worm gearbox with a longer service life and high efficiency of 2.1
rpm. min-1 maintenance
- free design.
Output hole with a 25mm groove on both sides of the gearbox
suitable for grilling loads up to
300kg. Replacement No. PK 51371
Technical parameters of the set:
P211A-F08SI-QB7: P211A 1: 9.83 71 / B14, + P050 1:68 71 / B14 + GMYL71B4B14F1; P050FB09C0-QB3: P050FB 1:68 71 / B14; GMYL71B4B14F1; 0.37 kW; 2p = 4; 230 V; 50 Hz; IP55; F; IMB14, run and start capacitor
- Protection: IP55
- For ambient temperature: 80 ° C
- Standard paint: RAL7030
- Casing: Aluminum
- Dimensions of the set: LxWxH
- When roasting larger piglets and pigs, it is necessary to ensure the most ideal centering of the roast and, if possible To avoid operation with large backlash needles, these can cause excessive shocks to the transmission shafts and damage the gear system.
As part of safety, it is generally necessary to connect the motor to the mains via a circuit breaker and also observe the applicable standards during installation (this will prevent electric shocks and reduce the possibility of motor damage).