complete with front wheel and motor 0,18kW / 230V; n2 = 2.3 min-1;

366,6 EUR 303,0 EUR excl. VAT

Personally in shop:on request

With a delivery company:on request

Single-phase design of the EXTRA set of the MOLL MOTOR 180 W for voltage 230V with a high-quality HYDRO-NEC 2x worm gearbox with a longer service life and high efficiency of 2.3 rpm. min-1 maintenance - free design. Output hole with 18mm groove on both sides of the gearbox suitable for grilling loads up to 180kg.

Single-phase version of the EXTRA set

Engine: 180W
Tension: 230V
Output speed: n2 = 2.3 rpm
Max load: 180 kg.
Design: with high-quality HYDRO-NEC 2x worm gearbox
Outlet opening: 18 mm from the groove on both sides of the gearbox

Replacement No. PK 51181

Technical parameters of the set:

P211A-F08SI-PB3: P211A 1: 9.83 63 / B14, + P045 1:60 71 / B14 + ER63C4B14F1 TW; P045FB 1:60 71 / B14; ER63C4B14F1 TW; 0.18 kW; 2p = 4; 230 V; 50 Hz; IMB14; IP54; F; RAL9005, running capacitor

Protection: IP55
For ambient temperature: 80 ° C
Standard paint: RAL7030
Casing: Aluminum
Dimensions of the set: LxWxH

When roasting larger piglets and pigs, it is necessary to ensure the most ideal centering of the roast and, if possible To avoid operation with large backlash needles, these can cause excessive shocks to the transmission shafts and damage the gear system.

As part of safety, it is generally necessary to connect the motor to the mains via a circuit breaker and also observe the applicable standards during installation (this will prevent electric shocks and reduce the possibility of motor damage).