Complete with front wheel and motor 0.09 kW / 4p, 230V, n2 = 3.2rpm
| Doporučená max.zátěž Kg: | 70 - 90 Kg |
| Dutá výstupní hřídel pr.( mm) | 18 |
| Otáčky (n2)ot./min: | n2= 3,2 min-1 |
| Jmenovité napětí [V]: | 230V~240V |
| Výkon elektromotoru [kW] | 0,90 kW |
Single-phase EXTRA design of the MOLL MOTOR set 90 W for voltage 230V with a high-quality HYDRO-NEC worm gearbox with a longer service life and a high efficiency of 3.2 rpm. min-1 maintenance - free design. Output hole with 18mm groove on both sides of the gearbox suitable for grilling loads up to 90kg.
Single-phase version of the EXTRA set
- Engine: 90W
- Tension: 230V
- Output speed: n2 = 3.2 rpm
- Max load: 90 kg.
- Design: with high-quality HYDRO-NEC worm gearbox
- Outlet opening: 18 mm from the groove on both sides of the gearbox
Replacement No. PKM 51090
Technical parameters of the set:
PP45 1: 438.6 56 / B5, + MY56B4B14F1Z-TO + MY56B4B5Z-SR; 0.09 kW; 2p = 4; 230 V; 50 Hz; IMB5; IP55; F; , Siluminrotor
- Protection: IP55
- For ambient temperature: 80 ° C
- Standard paint: RAL7030
- Casing: Aluminum
- Dimensions of the set: LxWxH
- When roasting larger piglets and pigs, it is necessary to ensure the most ideal centering of the roast and, if possible To avoid operation with large backlash needles, these can cause excessive shocks to the transmission shafts and damage the gear system.
As part of safety, it is generally necessary to connect the motor to the mains via a circuit breaker and also observe the applicable standards during installation (this will prevent electric shocks and reduce the possibility of motor damage).