centrifugal pump 4 COA 2 - 12 380V 0.26A
| Délka dodání z ext. skladu | 7 |
| Hloubka ponoru cm (A) | 12 cm |
| Jmenovité napětí [V]: | 380V~440V |
| Materiál | Hliníkové pouzdro (AL) |
| Průtok maximální [l/min] | 25 litrů/min ( 0,42 litrů/sec ) |
| Teplota čerpaného média max.[C°] | 60 C° |
| Výkon elektromotoru [kW] | 0,09 kW |
| Výtlak maximální [m] | 4 m |
Submersible vertical centrifugal electric pump series 4 COA 2-12.
- Voltage: 400 V
- Power consumption: 0.09 kW
- Discharge max .: 4 m - 40 kPa
- Flow rate max .: 25 l / min
- Immersion column: 12 cm
- In aluminum frame, color RAL 7030 (gray)
-
Maximum dirt size 0.5 mm.
COA 10,14,16,25 series electric pumps are used for pumping cutting and cooling emulsions on machine tools. The viscosity of the pumped liquid can be a maximum of 150 mm2.s-1, the temperature of the pumped liquid 0-60 ° C, the size of impurities should not exceed 0.5 mm. Pumps must not be used to pump flammable liquids.
The pumps have a special flange shape for mounting directly on the coolant container. The maximum and minimum liquid level height is determined by the dimensional sketch. Mounting dimensions comply with DIN 5440. Voltage and frequency:
- Pumps are normally manufactured for voltage: 380-440V,
- 288-322V
The pumps can be used for a frequency of 50 to 60 Hz. Working conditions Climatic design according to EN 60 721-3-3 mild WT (M) tropical hot WDa Product location category according to EN 60-721-3-3 (3K4, 3B1, 3C2, 3S2, 3M3) Pumps can operate up to 2000 m above sea level