Agua Stop CEYS total barrier gray 4kg

DESCRIPTION
Waterproofing with high efficiency. The total barrier ensures the impermeability of any surface, fills and repairs cracks and joints. Thanks to its unique technology, it creates a permanent elastic membrane, highly resistant to UV radiation and bad weather.

Unique composition "POLYMER TOTAL WATER PROOF"
High load - walking.
High adhesion.
Resistant to standing water.
Solvent free.
Maximum wear resistance.
Can be applied when wet.
Rainproof in 4 hours.
Paving can be laid on it.

Other properties
100% waterproof.
High flexibility.
Simple application.
Quick drying.
No losses, this is the final product.
High filling capacity.

PREPARATION OF DOCUMENTS
For optimal results, clean the area to be treated well. Always mix the product lightly before use, either by hand or using a blender at low speed. For problematic surfaces, it is recommended to apply a thin layer of primer.

CRACKS, JOINTS AND CONTACT SURFACES
To cover existing cracks (< 2mm), apply the product into the crack. Allow to dry and cover with a uniform layer of 1 mm thickness around the area where seepage may occur.

COVERINGS WITH MEDIUM AND MORE STRESS
Apply a uniform layer of the product to the surface using a roller, trowel or brush. To achieve optimal waterproofing on the entire roof, it is recommended to apply two overlapping layers with a time interval of 7 hours between individual layers. For a surface that is moderately loaded: 2 layers of 0.75 kg/m2.

FLOOR ADJUSTMENTS WITH THE SUBSEQUENT PLACEMENT OF FLOORING
Apply two mutually crossed layers, consumption 0.75 kg/m2 per layer. Place Support Mesh between layers and allow to dry for at least 7 hours. Add silica sand to the still wet product to ensure proper adhesion of the paving.